Ultra Mount Mounting Instructions
- Determine where you want to display your jersey.
- Hold the mounting base to the wall and make two marks on the wall through holes (hold mount as level as possible).
- Remove mounting base and drill holes on spots marked. If you are using the included wall anchors (good for drywall) use a 3/16 size drill bit. If mounting directly into a stud or other material use a drill bit the same size as the screw.
- Insert wall anchors (drywall only). Be sure they are flush to the wall.
- Use included screws and attach mounting base to the wall. Secure firmly.
- Slide rod through mounted base.
- Hang jersey on rod. Center rod and jersey in respect to mounting base.
- Place cap on base.
Installation Hints
If rod is too long you can easily shortened by using a hack saw or pipe cutting tool to desired length. Simply cut the bar and replace the end cap.
For best display results the cross bar should be 1-2 inches shorter than the measurement from shoulder seam to shoulder seam. If rod is too long you can easily shortened by using a hack saw or pipe cutting tool to desired length. Simply cut the bar and replace.
|
Baseball Borders
